5件が見つかりました。

並び替え
・
論文
SCC 深さ測定 PD 試験受験者の技量評価
著者:
笹原 利彦,Toshihiko SASAHARA,直本 保,Tamotsu JIKIMOTO,秀 耕一郎,Koichiro HIDE,井上 裕嗣,Hirotsugu INOUE
発刊日:
公開日:
キーワードタグ:
The Japanese PD qualification examination for SCC through wall depth sizing started in March, 2006, and was operated by PD Center of Central Research Institute of Electric Power Industry (CRIEPI). As of March 31, 2009, 23 examination courses have finished and 27 out of 38 candidates passed the examination. The total number of test including retest was 63. Increase in the examination pass rate of retest personnel indicates improvements in the depth sizing technique through PD qualification examination...
英字タイトル:
Evaluation of SCC Depth Sizing Candidate and Performance
論文
オーステナイト系ステンレス鋼溶接継手の金属組織と 残留応力に及ぼす実機での高温長時間使用および補修溶接の影響
著者:
小原 智史,Satoshi OBARA,高屋 茂,Shigeru TAKAYA,若井 隆純,Takashi WAKAI,浅山 泰,Tai ASAYAMA,鈴木 裕士,Hiroshi SUZUKI,齊藤 徹,Toru SAITOH,Laurent MARTIN
発刊日:
公開日:
キーワードタグ:
For the commercialization of fast breeder reactors (FBR), it is essential to enhance the economic competitiveness by reduction of total cost by elongation of plant service period. In this point of view, it is important to establish the assessment method of integrity of aged weld joint and repair welding for the components of future long life FBR. In the present study, evolution of microstructure is evaluated for the 304SS-304SS weld joint which was used for 88,000h at 526-545°C in the French proto-typ...
英字タイトル:
Influence of FBR plant service and repair welding on microstructure and residual stress of austenitic stainless steel weld joint
論文
ハイブリッド計測による配管ヘルスモニタリング法の研究
著者:
田川 明広,Akihiro TAGAWA,小島 史男,Fumio KOJIMA
発刊日:
公開日:
キーワードタグ:
The purpose of this study is to develop a hybrid sensor to be able to measure two or more physical values (the pipe surface temperature, the pipe wall thinning and the temperature of an internal fluid) with one sensor with an electromagnetic acoustic transducer. Each result of a measurement can improve the measurement precision by doing working that calibrate each other. The piping surface temperature was measured by converting the direct current resistance at the temperature by using the EMAT coil. A...
英字タイトル:
Study on pipe health monitoring method by hybrid measurement using electromagnetic ultrasonic
論文
実機プラントの炉心シュラウドへのウォータージェットピーニング（WJP）適用とWJP施工後の残留応力測定
著者:
大城戸 忍,Shinobu OKIDO,椿 正昭,Masaaki TSUBAKI,千葉 篤志,Atsushi CHIBA,佐川 渉,Wataru SAGAWA,松田 徹,Toru MATSUDA
発刊日:
公開日:
キーワードタグ:
Residual stress improvement technologies have been developed and applied to Boiling Water Reactor (BWR) plant components in order to prevent from stress corrosion cracking (SCC) of stainless steel and Ni-based alloy materials. Water Jet Peening (WJP) is one of the effective procedures for residual stress improvement, and has the various advantages for the application to the reactor internal components of the operating nuclear power plants because WJP uses only water for residual stress improvement. As...
英字タイトル:
Application of Water Jet Peening to the Shroud Components in BWR Power Plant and Residual Stress Measurement after WJP.
論文
照射損傷評価のための遠隔操作式振動試料型磁力計の開発
著者:
高屋 茂,Shigeru TAKAYA,山県 一郎,Ichiro YAMAGATA,市川 正一,Shoichi ICHIKAWA,永江 勇二,Yuji NAGAE,若井 栄一,Eiichi WAKAI
発刊日:
公開日:
キーワードタグ:
The remote operated vibrating sample magnetometer (VSM) for neutron irradiated samples has been developed. The maximum range of applied magnetic field is more than ±0.5/?0 A/m, and the resolution of magnetic moment is higher than 5 ×10-8 A?m2. The hysteresis loops of neutron irradiated samples were measured by this VSM, and the relationships between dose, which is one of epresentative irradiation parameter, and magnetic properties such as magnetic coercive force were examined. As result, it was revealed tha...
英字タイトル:
Development of Remote Operated Vibrating Sample Magnetometer for Evaluation of Irradiation Damage
Copyright © 2019 保全技術アーカイブ - サイトポリシー