2件が見つかりました。

並び替え
・
論文
原子炉再循環系配管への超音波探傷試験実施・評価に関するノウハウ
著者:
清水 敬輔,Keisuke SHIMIZU,設楽 親,Chikashi SHITARA,小林 輝男,Teruo KOBAYASHI,山下 理道,Norimichi YAMASHITA,岡田 亮兵,Ryohei OKADA,稲垣 哲彦,Tetsuhiko INAGAKI,中田 親秀,Chikahide NAKADA,長松 弘幸,Hiroyuki NAGAMATSU,近畑 英之,Hideyuki CHIKAHATA,山本 幸司,Koji YAMAMOTO,枡 明彦,Akihiko MASU,牧原 善次,Zenji MAKIHARA,高津 光志,Mitsushi TAKATSU,岩田 潔,Kiyoshi IWATA,東海林 一,Hajime SHOHJI
発刊日:
公開日:
キーワードタグ:
After 2002, Stress Corrosion Cracking (SCC) came to be detected in the low carbon stainless steel PLR Piping of BWR plants. However, it worked on the improvement of ultrasonic examination technology for PLR Piping in Japan BWR Owners Group (JBOG) , because the mistake of the evaluation was caused as a rare case. In this study, it introduces the improvement of ultrasonic testing technology and evaluation....
英字タイトル:
Know-How for the Ultrasonic Examination Practice & Evaluation of PLR Piping
論文
複合型光ファイバを用いた 1 インチ伝熱配管用 観察補修レーザー加工ヘッドの開発
著者:
岡 潔,Kiyoshi OKA,西村 昭彦,Akihiko NISHIMURA,関 健史,Takeshi SEKI,赤津 朋宏,Tomohiro AKATSU,山下 卓哉,Takuya YAMASHITA
発刊日:
公開日:
キーワードタグ:
A composite-type optical fiberscope was combined with a laser processing head to repair heat exchange pipes of Fast Breeder Reactor (FBR). The head can rotate axially and move back and forth longitudinally in the 1-inch pipes. The property of fiberscope and the motion of the head can successfully observe the pipe’s inner surface to find the cracks which should be repaired by laser welding. The project, which aims for developing the integrated system of inspection and repair, proposes an effective cost...
英字タイトル:
Development of a Laser Processing Head Using a Composite-type Optical Fiberscope to Inspect and Repair 1-inch Heat Exchanger Pipes
Copyright © 2019 保全技術アーカイブ - サイトポリシー